Why can't the computer of the community gate and the display screen be linked?
The reasons why the computer of the community gate and the display screen cannot be linked may include IP address setting issues, network firewall conflicts, virus infections, hardware connection problems, driver and software issues, power supply failures, display screen hardware damage, control system failures, and environmental factor interference.
IP address setting issue: If the IP addresses of the computer and the LED display are not set or are not in the same network segment, it will result in a connection failure. You need to manually set the IP address of the computer to ensure it is in the same local area network as the display.
Network firewall conflict: The system firewall may block communication. In this case, the firewall should be temporarily turned off or the settings adjusted to allow port communication between the LED display and the computer.
Computer virus infection: If a computer is infected with a virus, it may cause changes to system files and affect network connections. It is recommended to use anti-virus software for a comprehensive scan and virus removal, and ensure that the real-time protection function of the anti-virus software is enabled.
Hardware connection issue: Loose or damaged connection cables (such as network cables, HDMI cables) can cause signal interruption. Check if the connection cables are securely plugged in, or replace them with new ones. Additionally, the cables connecting the barrier display screen to the control board may also be loose or damaged. Carefully inspect and reinsert or replace them.
Driver and software issues: Incompatibility or absence of drivers may cause the computer to fail to recognize the display screen. Updates or reinstallation of drivers are required. Additionally, the barrier control board may have program errors, chip damage, or circuit board failure, and updates to the program or replacement of the control board are necessary.
Power failure: Abnormal power supply (such as damaged power adapter, unstable voltage or blown fuse) can cause the display to stop working. It is necessary to check if the power supply is normal, including voltage stability, the integrity of the power cord, and the function of the power switch.
Display screen hardware damage: Aging of LED light beads, burnout of the driver chip, or physical damage to the screen can all cause display abnormalities. It is necessary to check whether the internal circuitry, backlight, and driver chip of the display screen are damaged.
Control system failure: Errors in the motherboard program, improper parameter settings, or software conflicts may cause the display to fail to respond properly. It is necessary to check whether the signal configuration of the ground sensing coil and other parameters are correct.
Environmental factors interference: Extreme temperatures, humidity or strong electromagnetic interference may affect the normal operation of the display screen. It is necessary to ensure that the equipment is in an appropriate environment and avoid being close to high-voltage lines and other strong electromagnetic sources.