The common installation methods for LED displays include the following five types:
Embedded installation: Suitable for indoor screens with smaller areas. Due to the limited installation space, in order not to occupy the space, an area of the same size as the screen body is excavated on the wall, and the LED display is embedded in the wall. The wall must be a solid wall. The maintenance is carried out from the front, which is more costly.
2. Wall-mounted installation: This is mostly suitable for the installation of indoor LED displays. It is applicable to areas with a smaller size (less than 10 square meters), and the wall must be a solid one. Hollow bricks or simple partition walls are not suitable for this installation method.
3. Wall-mounted installation: This is mostly suitable for large-scale venues such as LED electronic displays in stations and airports, serving as directional signs. The screen area should be relatively small (less than 10 square meters). It is required to have a suitable installation location, such as an existing beam or lintel above, and the screen usually needs a rear cover.
4. Column-mounted installation: This is mostly used for the installation of outdoor LED electronic display screens. It is suitable for areas with wide views and relatively open surroundings, such as squares and parking lots. Depending on the size of the screen, it can be divided into single-column and double-column installations.
5. Roof-mounted installation: This method is mainly applicable to outdoor LED electronic display screens for advertising. The installation location is typically on the roof of buildings. As the height of the building increases, the wind resistance level to be considered should also increase accordingly.
For a shopping mall, it is recommended to use the inset design, but some space needs to be reserved.