Reliable Power Supply and Automated Management
• Dual power supply redundancy design: Support POE (Power over Ethernet) and DC12V dual power supply modes. POE supplies power and transmits data through network cables at the same time to simplify wiring; DC12V serves as a backup power supply and switches seamlessly when POE is interrupted to avoid time synchronization interruption caused by power supply problems.
• Environmental adaptability optimization: Automatically adjust the LED display brightness through the ADC dimming function to reduce visual interference caused by ambient light changes, while reducing equipment power consumption and improving system stability. For example, increase brightness in strong light environments and decrease brightness in dim light environments to ensure clear time display.
• Remote configuration and monitoring: Remotely adjust parameters such as time format, display mode and time service priority through the web configuration interface, and real-time monitor equipment status (e.g., signal strength, battery level, temperature). When an abnormality is detected, the system automatically alarms and attempts to recover, reducing the need for manual intervention.
5. Typical Application Scenario Verification
• Traffic indication system: On expressways or urban road intersections, multiple LED display screens need to synchronously display countdown or warning information. Through satellite + 4G dual time service sources and combined with the PTP synchronization protocol, millisecond-level alignment of all display screens is realized to avoid driver misjudgment caused by time differences.
• Large exhibition events: At the exhibition site, multiple LED screens need to play videos or animations synchronously. Through local OCXO clock timing + NTP backup, the screen synchronization can be maintained even in unstable network conditions to improve the audience experience.
• Queuing call system: In banks, hospitals and other places, multiple call terminals need to synchronously display the current queuing number. Through gPTP synchronization in the local area network, the time of all terminals is ensured to be consistent to avoid queuing confusion caused by time differences.
Summary
The millisecond-level alignment of LED network synchronous clocks is the result of the joint action of hardware accuracy, software algorithms, network optimization and power supply guarantee. Through multi-source time service coordination to reduce single-source risks, high-precision local clocks to reduce cumulative errors, stable jitter control to improve transmission reliability, and dual power supply and automated management to enhance system robustness, strict time synchronization requirements are finally achieved in scenarios such as transportation, exhibitions and queuing.