LED constant current power supply driver product design and core technologies

Mar 30, 2026

Leave a message

I. Product Design The design of LED constant current power supply drivers aims to address two key issues: achieving constant current drive and improving the optical efficiency of LEDs. The core circuit topology is mainly divided into isolated and non-isolated types, depending on whether electrical isolation is achieved. Depending on specific application requirements, the output mode can adopt constant voltage (CV), constant current (CC), or constant current constant voltage (CCCV) operation.

To meet energy efficiency and harmonic standards (such as the US Energy Star and the EU IEC 61000-3-2 standard), power factor correction (PFC) must be considered in the design. Technologies include passive PFC and active PFC. Heat dissipation is critical to lifespan; care must be taken during design to ensure that the LED driver circuit is not in close contact with the heat dissipation system. Typically, an aluminum substrate is used, and power devices are evenly arranged. For high-power applications, auxiliary fans may even be required.

Regarding safety and protection, the product must comply with safety regulations and electromagnetic compatibility (EMC) requirements, and have overload, short circuit, overvoltage, and overtemperature protection functions. Furthermore, advanced distributed constant current design manages and maintains the stability of branches and the overall circuit by establishing independent constant current sources at each parallel branch point, resulting in high product stability and design flexibility.

II. Core Technologies Constant current control primarily employs two methods: the first is feedback control via comparators, using the comparator to detect LED current and achieving constant current control by changing the PWM output duty cycle; the second is feedback control via A/D converters, using the A/D converter to detect LED current and achieving constant current control by changing the PWM output duty cycle.

Distributed constant current technology establishes independent constant current sources at each parallel branch point to manage, maintain, and control the stability of branches and the overall circuit. This technology advocates "constant voltage first, then constant current," hence the definition of "distributed constant current technology." Software-based constant current driver current setting essentially involves establishing registers within the IC, setting the output current magnitude according to the storage method used in the actual product application, and completing the circuit current setting through intuitive digital writing via microcomputer software.

The emergence and technological maturity of dedicated single-stage APFC chips for LED lighting, such as BP3102, BP3105, and BP3108 suitable for PSR isolation schemes, and BP3309 and BP3308 driver chips of the BP33XX series for single-stage APFC control [9]. The main advantage of the single-stage flyback power factor correction LED driver power supply with FAN7527B as the core is its high power factor (generally greater than 0.95). The main AC power supply combined with control methods includes the following: primary-side feedback power supply, high-power isolated lighting power supply, non-isolated LED driver power supply, and thyristor dimming compatible power supply.

Send Inquiry