1. The location where the portable LED folding screen cabinet will be placed must be cleaned and lined with pearl cotton.
2. Handle the portable LED folding screen cabinet with care. When landing, place it back first, then the light surface, to prevent damage.
3. Do not pile up modules haphazardly or stack more than 10 units. When stacking modules, place them with the light surfaces facing each other and use pearl cotton for insulation.
4. It is recommended to place the portable LED folding screen cabinet flat with the light surfaces facing up. If there are too many and they need to be placed upright, take extra care to protect them. Do not place them upright in areas with high vibration.
5. When moving the cabinet, lift it. Do not push or drag it on the ground to avoid damaging the bottom modules due to uneven ground. Keep the portable LED folding screen cabinet balanced during hoisting and do not swing or rotate in the air. Handle the cabinet or modules with care when installing them; do not throw them.
6. When adjusting portable LED folding screen products, use a soft rubber mallet to tap the metal parts of the casing. Do not strike the modules. Squeezing or colliding between modules is strictly prohibited. If there are gaps or abnormal positioning, do not use a hammer or other hard objects to strike the casing or modules. Instead, remove the casing to remove any obstructions and try again.
In summary, these are the correct methods for storing portable LED folding screens. To better protect these products, all personnel must wear cordless anti-static wrist straps during handling, installation, and maintenance.
