Core Requirements for Environmental Protection

Outdoor Exhibition Booth LED Rental Screen Environmental Adaptation Solution

I. Core Requirements for Environmental Protection

Outdoor exhibition booths require LED screens with an IP65 or higher protection rating to withstand rain, dust, and UV radiation. The screen mask should be made of anti-glare and anti-aging materials to prevent yellowing from prolonged sun exposure. The cabinet structure must have wind resistance, suitable for wind speeds below level 6. Windproof cables should be added during hoisting, and the bottom support should be reinforced during stacking to ensure safe outdoor use.

II. Display Effect Environmental Adaptation

Brightness needs to be increased to over 3500 nits, with automatic light sensing adjustment to adapt to varying light intensity and prevent screen washout in strong sunlight. High refresh rate and high grayscale technology should be used to combat image blurring caused by strong outdoor light, ensuring smooth and clear dynamic content without ghosting. Color calibration should adapt to outdoor light changes, adjusting white balance at different times to maintain color consistency.

III. Special Specifications for Outdoor Installation

Waterproof cables and connectors should be used for wiring. Power lines and signal lines should be laid separately and protected to prevent water ingress. Lightning protection devices and grounding systems should be installed, with a grounding resistance of ≤4Ω, to mitigate lightning strike risks. After installation, manual spray testing should be conducted to verify waterproof performance and check signal stability, adapting to the complex outdoor signal environment and weather changes.