During installation and maintenance, anti-static wrist straps should be used to further reduce the effects of static electricity.
When handling the cabinet, lift it instead of pushing or dragging it on the ground to avoid damaging the bottom module due to uneven surfaces. During lifting, keep the cabinet balanced to prevent swinging or rotating in the air. Handle the cabinet or modules with care during installation; throwing is strictly prohibited.
88. If adjustment of the LED display is necessary, use a soft rubber hammer to tap the metal parts of the cabinet, avoiding hitting the modules. Compression and collision between modules are strictly prohibited.
If gaps or positioning abnormalities occur, do not use hard objects such as iron hammers to strike the cabinet and modules. Try lifting the cabinet to remove any foreign objects before attempting again.
When placing and using the LED display, it is essential to ensure it is in a suitable environment. This involves several aspects, including site selection, protective measures, and precautions during operation. Only by following these requirements can the LED display operate stably and safely, providing high-quality display effects.
1. The operating temperature of the LED display should be maintained between -20°C and 50°C, and the humidity should be controlled within 10% to 90% RH.
Avoid using or storing the LED display in high-temperature, high-humidity, or high-acid/alkaline/salt environments to prevent damage.
During use, keep away from flammable materials, gases, and dust to ensure safety.
During transportation, be extremely careful to avoid strong impacts and contact with sharp objects.
When the ambient temperature is too high or the heat dissipation conditions are poor, it is recommended to avoid continuous use of the LED display for extended periods.
